UFS821/UFS822 UFS902/UFS910 UFS912/UFS913/UFS922/UFS923/UFS925 Enigma титан NeutrinoHD Новые возможности: DVB-C поддержкой (Titan) Импорт satellites.xml Titan (через меню: File - Import satellites.xml>) Исправлены ошибки: Transponder ids автоматически устанавливается на 0 (Titan) Примечания Под Microsoft Windows. NET Framework 2.0 должен быть установлен 3.0 или 3.5 Под Linux, Mono Framework установлены (проверено на Mono 2.0.1, WinForms библиотеки, возможно, потребуется установить его с помощью "SUDO-APT-получить установку libmono-WinForms *")
СКАЧАТЬ ...и хорошее настроение не покинет больше вас.
Added by PKT: [ALL] OpenPLI updated 10-05-2013 [ALL] python2.7 updated [ARM] fix firmware update from BP [ARM] fix subtitles [ALL] add PKT HDMI-CEC Manager [BP->Settings->HDMI Setup] [ALL] fix making & cleaning devs for pl2303 & ftdi [ALL] speedup network test [ARM] enable automount support [ARM] add missing libs for mytube [ALL] add HDD Manager to BP-> Disk Menu [ALL] Partition Manager to BP-> Disk Menu [ALL] optimize SWAP script [ALL] fix SWAP start on box with NAND Image [ALL] update main menu [ALL] add DLNA client support menu [ARM] Add missing rtmpdump for WebMedia 10 and other [ALL] default PIG on exclude ADB {ALL} IPTV GS fix for ChannelList [ALL] skip network check in first assistant [ipbox] add loading RF modulator in rcS if exists [ADB] fix autorestore {ALL} removed unsupported Nonlinear format from AspectRatio [ALL] fix EPG multifunctioning [ALL] fix Channel Control plugin support {7162} fix V.Format key for aspect ratio selection {ALL} fix python 2.7 plugins import from PKTs server [ALL] fix map ca0 to ca1 {ALL} standby on/off switching speedup & other internal code changes {ALL} force reboot function deactivated cause doesn't work so far [SF918,SF1028] Enable extinguish [ALL] set default OFF hdmicec function: tv_standby, tv_wakeup, active_menu, active_source [ALL] fix OpenWebif streaming [GM7162] add switch between DVB-T/C @BP->Settings->Extra Setup [ALL] according to @data devil - added additional key info in locations: EPGSelectActions ChannelSelectEPGActions {ALL} added TELETEXT support in KeyMapper : available for red & yellow color keys [ARM] Add CrossEPG [arm] add missing libs {ARM} fix graphEPG fonts for other skins [ALL] update channel list
[ALL] update djcrash downloader v1.3.0 - add checking server response - add update local date field after installation
[ALL] update PKT Samba Server Manager v1.5 - add support for Hypercube - add some new entry to smb.conf
[ALL] update Media player -set /hdd as default browsing dir -set config.mediaplayer.defaultDir=/media/ -functionality fixes - added dynamic OC
[ALL] update EmuManager v1.1.7 -add properly support of wicardd
{ALL} update BluePanel - speed up - optimized code - small fixes - num & color keys small functionality fix - exit key fix - added boxtype exclude
[ALL] add Overclocking Tool v2.0.8 - add management over/down clocking - add checking oc driver - add error message when oc driver is not available - add downclocking CPU in standby support - enable Fast Boot support - add lock/unlock button - add WARNING message - add Dynamic OC - add frequency self calculating algorithm to increase available range of values - add CPU dynamic frequency control in standby mode when recording
{ALL} InfoCenter -added CPU frequency read online. -added Net IP
[ALL] update PKT Install Manager v2.7.7 - add support for Hypercube - add support MultiBoot for GM 990/GM TRIPLEX STB - fixed exit from Disk Manager - fix switch between multiboot<->nand_e2 - fix switch between multiboot<->nand_spark - add Mario Bros cleaning tool - add additional boot_system check - set default bootdelay at 10s for gm990 - add reboot button - add show mounted partition - add support ext4 file system - increase choice of size partition from 10GB to 1TB - add size of left free space - add excluded extended partition id - speed up loading install manager & all code in python - add info when disk or image file is not detected - add lock installation when disk or image file is not detected - fix usb and usbhub loading when more than 1 storage device are connected to the STB - add multiboot for Hypercube Conditions: - FAT partition is using for kernels area - sdx2, sdx3, etc... is using for rootfs - correctly usb drive partitions can be prepare by Disk manager - fix refresh status on hypercube - fix rescan devices after repartition in Disk Manager - fix detect image to install [hypercube] - add alternative startup from flash when usb storage can not be initialize [hypercube] - code optimization
[ALL] Update Backup Manager v2.2 - add support for Hypercube - add full backup of flash for GM990 / TRIPLEX/ Hypercube - fix checking free space in /hdd - set copy settings default off - add copy of channel list revision - add selection usb or flash image in whole image backup
Known Issues: [ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek We are working around this problem and some changes in this direction have been made, however we can not guarantee 100% secure [TRIPLEX] for oscam use boxtype=ipbox
Special THX to TDT group, all sh4 community and all betatesters.
FTP login: root, passwd: pkteam
Скачать ...и хорошее настроение не покинет больше вас.